System Information

Attention: When opening the chassis make sure to slide the chassis top to the rear. Lifting the top up may shear the SIM Slot from the PCB.

Being a powerful, yet small fanless system, the Arrakis Pico Mk3 may reach very high surface temperatures in excess of 60°C/140°F with risk of injury. Users should ensure sufficient protection against touching.

To allow for sufficient heat removal we recommend: 30mm distance on either side of the Arrakis Pico Mk3 when mounted on a DIN-Rail 100mm headroom above the Arrakis Pico Mk3 when mounted horizontally. The heatsink should be on top.

System Drawing

Attention: Do not connect Voltage to the PSW Pin on the Power Connector!

Power Connector Pin-Out	Description
GND	Ground
VCC	12-24V
GND	Ground
PSW	External Power Switch Connector

Mainboard Block Diagram

This block diagram illustrates the relationships among all interfaces and modules on the mainboard.